Products Show

Location:Home > Products > Anti-static Electronic Tools> HIOS Torque Tester & Electric Screwdriver & Power Supply > HIOS Electric Screwdriver Power Supply CLT-50C
HIOS Electric Screwdriver Power Supply CLT-50C
左滚动
  • HIOS Electric Screwdriver Power Supply CLT-50C
右滚动
  • HIOS Electric Screwdriver Power Supply CLT-50C
  • Category:HIOS Torque Tester & Electric Screwdriver & Power Supply
  • Model:
  • View:37313
HIOS Electric Screwdriver Power Supply CLT-50C
Hotline: 86-13500068891
Fax: 86-0755-82788221

For more information, please leave your inquire.

  • Name:
  • E-mail:
  • Remark:
  •   

Detail

HIOS Electric Screwdriver Power Supply CLT-50C


Fectures of the Power Supply


  • The power supply can be provide the power of the different kinds of the electric screwdriver,forexample:HIOS CL-2000/3000/4000/5000/6000/6500
  • The power supply can preset the screw quantity for each wookpiece (Maximum can be set 99)
  • The screen can display the residual screw quantity should to lock , this is can greatly reduce the leakage screw when on working
  • The power supply Can be count for the already paid lock screw (Maximum can be set 9999)
  • Every finished the lock screw , the buzzer will be alarm .
  • The time of the buzzer is 0-5 seconds , this can be adjustable .
  • can be distinguish the adjustable time for the lock , during the time of the distinguish , it will not count for the second screw lock so that can prevent repeat the counting .



The method to operate the CLT-50 Power Supply


  • Set for the lock screw quantity : press “enter” , you will see digital flicker on the right of the power supply , Through the UP or DOWN key to default for each job should paid to screw quantity , after finished the set , press the set and this is finished .



  • Parameter Settings: press SET key 2 seconds, into the SETA. 
  1. Discriminant time adjustment setting, the left four screen, display the time, right now but through the UP or DOWN key to adjust time (0, 2 seconds to 2.5 seconds adjustable), decimal point according to lock set time flicker. after the completion , light press SET button to enter the next step parameter Settings
  2.  Adjustabel for the buzzer , the right of the 4 screen , it has display the time and voice for the buzzer . at this time , it can be adjustabe through the UP or DOWN key for the time (0-5 seconds can be adjustable) , after finished the setting , press the SET, and exit the condition of seeting , then enter into the normal woorking condition .
  3.  Light press RESET, turn the unpaid screw quantity to initial value, it will going on the new counting . Press RESET for 2 seconds , turn the already paid screw quantity to the zero , (the right 4 screen) , press DEC , it will add 1 value for the residual screw , this key is used for lock the screw , which it have not completed but it have been counted (right 2 screen ).


The power supply can operate series of electric screwdriver


  • CL-Series: CL2000-7000
  • SS-Series: SS200-7000
  • A-Series : A4500-5000










close
close